mirror of
https://github.com/suikan4github/kaiten-yaki.git
synced 2025-12-20 02:21:17 -03:00
106 lines
3 KiB
Bash
106 lines
3 KiB
Bash
#!/bin/bash
|
|
|
|
# Configuration parameters for Kaiten-Yaki
|
|
|
|
# Storage device to install Linux.
|
|
export DEV="/dev/sda"
|
|
|
|
# Whether you want to erase all contents of the storage device or not.
|
|
# 1 : Yes, I want to erase all.
|
|
# 0 : No, I don't. I want to add to the existing LUKS volume.
|
|
export ERASEALL=0
|
|
|
|
# Logical Volume name for your Linux installation.
|
|
# Keep it unique from other distribution.
|
|
export LVROOTNAME="anko"
|
|
|
|
# Suffix of the optional logical volumes.
|
|
# If you want to have optional OVs, set USELVEXT# to 1.
|
|
# Then, the suffix will be added to the LVROOTNAME.
|
|
# For example, Assume you have setting below :
|
|
# LVROOTNAME="anko"
|
|
# USELVEXT1=1
|
|
# LVEXT1SUFFIX="_home"
|
|
# USELVEXT2=0
|
|
# LVEXT2SUFFIX="_var"
|
|
# You will have
|
|
# anko
|
|
# anko_home
|
|
# You will not have anko_var because of the USELVEXT2=0.
|
|
export USELVEXT1=0
|
|
export LVEXT1SUFFIX="_home"
|
|
export USELVEXT2=0
|
|
export LVEXT2SUFFIX="_var"
|
|
|
|
|
|
# Volume size parameters.
|
|
# Note that the order of the volume creation is :
|
|
# 1. EFI if needed
|
|
# 2. SWAP
|
|
# 3. LVROOT
|
|
# 4. LVEXT1 if needed
|
|
# 5. LVEXT2 if needed
|
|
|
|
# Set the size of EFI partition and swap partition.
|
|
# The unit is Byte. You can use M,G[Kaiten-Yaki] notation.
|
|
# You CANNOT use the % notation.
|
|
export EFISIZE="200M"
|
|
|
|
# Logical volume size of the swap volumes.
|
|
export LVSWAPSIZE="8G"
|
|
|
|
# Logical volume size of the Linux installation.
|
|
# There are four posibble ways to specify the volume.
|
|
# nnnM, nnnG, nnnT : Absolute size specification. nnnMbyte, nnnGByte, nnnT byte.
|
|
# mm%VG : Use mm% of the entire volume group.
|
|
# mm%FREE : Use mm% of the available storage in the volume group.
|
|
export LVROOTSIZE="10G"
|
|
|
|
# Logical volume size of the optional volumes.
|
|
export LVEXT1SIZE="30G"
|
|
export LVEXT2SIZE="10G"
|
|
|
|
|
|
# Usually, these names can be left untouched.
|
|
# If you change, keep them consistent through all installation in your system.
|
|
export CRYPTPARTNAME="luks_volume"
|
|
export VGNAME="vg1"
|
|
export LVSWAPNAME="swap"
|
|
|
|
# Do not touch this parameter, unless you understand what you are doing.
|
|
# 1 : Overwrite the existing logical volume as root volume.
|
|
# 0 : Create new logical volume as root volume.
|
|
export OVERWRITEINSTALL=0
|
|
|
|
# Do not touch this parameter, unless you understand what you are doing.
|
|
# This is a paameter value of the --iter-time option for cyrptsetup command.
|
|
# If you specify 1000, that means 1000mSec. 0 means compile default.
|
|
export ITERTIME=0
|
|
|
|
|
|
# !!!!!!!!!!!!!! DO NOT EDIT FOLLOWING LINES. !!!!!!!!!!!!!!
|
|
|
|
# Detect firmware type. 1 : EFI, 0 : BIOS
|
|
if [ -d /sys/firmware/efi ]; then
|
|
export ISEFI=1 # Yes, EFI
|
|
else
|
|
export ISEFI=0 # No, BIOS
|
|
fi # is it EFI firmware?
|
|
|
|
# Detect drive type.
|
|
# For NVME drives, partition names should be prefixed by p.
|
|
if [[ ${DEV} == *"nvme"* ]] ; then
|
|
export PARTPREFIX="p" # Yes, NVME
|
|
else
|
|
export PARTPREFIX="" # No, regular
|
|
fi
|
|
|
|
# Set partition number based on the firmware type
|
|
if [ ${ISEFI} -ne 0 ] ; then
|
|
# EFI firmware
|
|
export EFIPARTITION=${PARTPREFIX}1
|
|
export CRYPTPARTITION=${PARTPREFIX}2
|
|
else
|
|
# BIOS firmware
|
|
export CRYPTPARTITION=${PARTPREFIX}1
|
|
fi # EFI firmware
|