Add test script for development

script/test/config01.sh

@@ -0,0 +1,112 @@
+#!/bin/bash
+
+# #####################################
+
+# Test setup. 
+# /dev/sdb/
+# ERASEALL
+# LVROOT 10%
+# LVEXT1 90%
+# LVEXT2 10%
+
+# #####################################
+
+# Configuration parameters for Kaiten-Yaki 
+
+# Storage device to install the linux.  
+export DEV="/dev/sdb"
+
+# Whether you want to erase all contents of the storage device or not.
+# 1 : Yes, I want to erase all.
+# 0 : No, I don't. I want to add to the existing LUKS volume. 
+export ERASEALL=1
+
+# Logical Volume name for your Linux installation. 
+# Keep it unique from other distribution.
+export LVROOTNAME="anko"
+
+# Suffix of the optional logical volumes. 
+# If you want to have optional OVs, set USELVEXT# to 1. 
+# Then, the suffix will be added to the LVROOTNAME. 
+# For example, Assume you have setting below : 
+# LVROOTNAME="anko"
+# USELVEXT1=1
+# LVEXT1SUFFIX="_home"
+# USELVEXT2=0
+# LVEXT2SUFFIX="_var"
+# You will have
+# anko
+# anko_home
+# You will not have anko_var because the USELVEXT2=0.
+export USELVEXT1=1
+export LVEXT1SUFFIX="_home"
+export USELVEXT2=1
+export LVEXT2SUFFIX="_var"
+
+# Logical volume size of the Linux installation.
+# 30% mean, new logical volume will use 30% of the free space 
+# in the LVM volume group. For example, assume the free space is 100GB, 
+# and LVROOTSIZE is 30%FREE. Script will create 30GB logical volume.  
+# Note that the order of the volume creation is : 
+# 1. EFI if needed
+# 2. SWAP
+# 3. LVROOT
+# 4. LVEXT1 if needed
+# 5. LVEXT2 if needed
+export LVROOTSIZE="10%FREE"
+
+# Logical volume size of the optional volumes. 
+export LVEXT1SIZE="90%FREE"
+export LVEXT2SIZE="100%FREE"
+
+# Set the size of EFI partition and swap partition. 
+# The unit is Byte. You can use M,G... notation.
+export EFISIZE="200M"
+export LVSWAPSIZE="8G"
+
+# Usually, these names can be left untouched. 
+# If you change, keep them consistent through all installation in your system.
+export CRYPTPARTNAME="luks_test"
+export VGNAME="vg_test"
+export LVSWAPNAME="swap"
+
+# Do not touch this parameter, unless you understand what you are doing.
+# 1 : Overwrite the existing logical volume as root volume. 
+# 0 : Create new logical volume as root volume. 
+export OVERWRITEINSTALL=0
+
+# Do not touch this parameter, unless you understand what you are doing.
+# This is a paameter value of the --iter-time option for cyrptsetup command. 
+# If you specify 1000, that means 1000mSec. 0 means compile default.  
+export ITERTIME=0
+
+# Void Linux only. Ignored in Ubuntu.
+# The font size of the void-installer
+export XTERMFONTSIZE=11
+
+# !!!!!!!!!!!!!! DO NOT EDIT FOLLOWING LINES. !!!!!!!!!!!!!!
+
+# Detect firmware type. 1 : EFI, 0 : BIOS
+if [ -d /sys/firmware/efi ]; then
+export ISEFI=1  # Yes, EFI
+else
+export ISEFI=0  # No, BIOS
+fi # is EFI firmaare? 
+
+# Set partition number based on the firmware type
+if [  ${ISEFI} -ne 0  ] ; then 
+# EFI firmware
+export EFIPARTITION=1
+export CRYPTPARTITION=2
+else
+# BIOS firmware
+export CRYPTPARTITION=1
+fi  # EFI firmware
+
+# Detect the GUI environment
+# This code is not efered. Just left because it is interestintg code. 
+if env | grep -w -e XDG_SESSION_TYPE -e DISPLAY -e WAYLAND_DISPLAY > /dev/null ; then
+    export GUIENV=1    # set 1 if GUI env.
+else
+    export GUIENV=0    # set 0 if not GUI env.
+fi